# auto-generated script
# night : 20070302
# camera : Cannon EOS f=85mm
# system start time is : 20070302_202615 local ( 20070302_232615 UT )
# PRIMARY SATELLITE = SWIFT
# SECONDARY SATELLITE = INTEGRAL
# SUN sets at 2100 LCO time, at (AZ,H)=(76.07,-9.91) [deg]
# SUN rises at 0650 LCO time
# SWIFT at 20070302_202615 local time is at (RA,DEC)=(27.17,42.24)
# WARNING : HETE pointing info was not available, check page : http://space.mit.edu/HETE/Latest_RADec.txt
# MOON RA=157.21=10h28m50.60s DEC=10.75 illum = 99.57 %
# MOON rises at 20070302_195615, illum = 99.39 %
# INTEGRAL RA=275.86=18h23m26.16s DEC=-21.76
# INTEGRAL rises above horizont at 233, sets at 1617
piman    0 cron_point_hete_off
piman 0 cron_point_best_target_off
piman 0 interpret_point_trigger_off
piman    1 exec_script_synchro(startup.pish)
#  MOON > 60 %
daq      0 change_param(CCD_NEW_LAPLACE_TRESHOLD_IN_SIGMA,6.00,-1)
# 
# Disabling automatic shutter opening due to :  MOON > 60 %
daq      0 change_param(CCD_OPEN_SHUTTER_WHEN_STARCOUNT_BELOW,-1,-1)
daq      2045 start_daq
piman    2045 auto_ag_mode_on
piman    2050 manual_mode_off
#  Autopointing command targets : SWIFT, INTEGRAL, GTN
# turning OFF cron
piman 2100 manual_mode_on
piman    2100 cron_point_hete_off
internal 2100 forced_point_best_target
mount 2100 raw_cmd(autoguide on)
internal 2100 send_pos_to_mount
mount 2100 stat
piman    2105 cron_send_pos_to_mount_on
internal 2110 send_pos_to_mount
mount 2110 stat
# turning ON cron
piman 2110 manual_mode_off
piman 2110 cron_point_best_target_on
piman 2110 interpret_point_trigger_on
piman    2240 manual_mode_on
piman    2240 cron_point_hete_off
piman    2240 cron_send_pos_to_mount_off
piman 2240 cron_point_best_target_off
piman 2240 interpret_point_trigger_off
piman    2240 exec_script_synchro(scan_evening.pish)
#  calculated scan time = 3140 sec
piman    2325 exec_script_synchro(end_scan.pish)
piman    2325 manual_mode_off
#  Autopointing command targets : SWIFT, INTEGRAL, GTN
# turning OFF cron
piman 2325 manual_mode_on
piman    2325 cron_point_hete_off
internal 2325 forced_point_best_target
mount 2325 raw_cmd(autoguide on)
internal 2325 send_pos_to_mount
mount 2325 stat
piman    2330 cron_send_pos_to_mount_on
internal 2335 send_pos_to_mount
mount 2335 stat
# turning ON cron
piman 2335 manual_mode_off
piman 2335 cron_point_best_target_on
piman 2335 interpret_point_trigger_on
# morning
piman    0425 manual_mode_on
piman    0425 cron_point_hete_off
piman    0425 cron_send_pos_to_mount_off
piman 0425 cron_point_best_target_off
piman 0425 interpret_point_trigger_off
piman    0430 exec_script_synchro(scan_morning.pish)
#  calculated scan time = 3250 sec
piman    0515 exec_script_synchro(end_scan.pish)
piman    0515 manual_mode_off
#  Autopointing command targets : SWIFT, INTEGRAL, GTN
# turning OFF cron
piman 0515 manual_mode_on
piman    0515 cron_point_hete_off
internal 0515 forced_point_best_target
mount 0515 raw_cmd(autoguide on)
internal 0515 send_pos_to_mount
mount 0515 stat
piman    0520 cron_send_pos_to_mount_on
internal 0525 send_pos_to_mount
mount 0525 stat
# turning ON cron
piman 0525 manual_mode_off
piman 0525 cron_point_best_target_on
piman 0525 interpret_point_trigger_on
# Do not worry about order, these two commads always go just before shutdown :
piman    0645 cron_point_hete_off
piman    0645 cron_send_pos_to_mount_off
piman 0645 cron_point_best_target_off
piman 0645 interpret_point_trigger_off
piman    0655 exec_script(shutdown.pish)